Hello from East Tennessee!

Feelin' social? Introduce yourself here!

Hello from East Tennessee!

Postby htmagic » Mon Jan 04, 2016 12:55 pm

Hi folks!

I just received a oneTeslaTS coil for Christmas.
It took several hours to build but I spread it out over 3 days so it wasn't that bad.
Although I tested it in stages per the manual, doing the interrupter test, low voltage test and then high voltage, during the high voltage test, I noticed smoke coming from under the torroid. It turns out that I burnt a nice long carbon track on the inside of the coil. Once you have a conductive path, unless you grind it out, it will keep arcing in the same place. In trying to fix the coil, it appears I broke the winding in the center. :oops:

So now I had to order another secondary coil. :shock:
The moral of the story is be gentle to the hairlike wire on the coil.
May the FORCE be with you and have a magical day!

MagicBill
htmagic
Tipsy Toggle Switch
 
Posts: 9
Joined: Mon Jan 04, 2016 9:13 am
Location: East Tennessee

Return to Introductions

Who is online

Users browsing this forum: JustARandomName and 0 guests